宁波明升太阳能科技有限公司
电话:0574-87463688
0574-88254279
手机:13216611198(李经理)
15306687860(朱小姐)
传真:0574-87463688
邮箱:zjmstyn@163.com
QQ:979290689
1. The location of solar heat collector must expose to the sun,and exists no shelter from sunshine all around and above. It must be fixed firmly in order to be protected from the damage of high wind.
2. The installation of main parts of the system shall be in order of support ,water tank and the vacuum tube heat collector
3. When assembling the vacuum tube ,put firstly some lubricant such as detergent to the mouth of tubes .Put on secondly the dust resistance ring. Insert (with turning) slowly the tube into water tank along the axis of the hole on the tank. Withdraw a little the tube ,and insert into the hole of the end seat .Assemble firstly two tubes to the two end holes of the water tank .Adjust the clearanca between the tank ho1e and the vacuum tube to be uniform .Fix it to the tank with screws.then,assemble the rest of tubes.
4. Following finish of installation of main parts, tubes and pipe connection start to proceed .
The connection will include for water out and in, overflow tube,vent.Connection of vent and overflow tube is especially important,as it will otherwise break the water tank.
5. Filling cold water to the vacuum tube solar heat collector which is empty but heated for long under sunshine is prohibited.Because,that will cause the explosion of tubes.It is recommended to fill water in the morning or during night time.
6.To ensure a normal work of the water heater during the winter time, it is recommended to protect the pipe line from frozen weather or evacuate the pipe line in order to avoid freeze and crack.